ME2009 PMSM Motor
Product Description
The motor is 92% efficient with battery pack voltages between 24 to 60 VDC. Continuous current of 150 amps at 48 VDC. This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor.
Inductance at 1000Hz: 19 micro Henry Phase to Phase, Maximum Rotor Speed mechanical limit is 6000 rpm, Winding Resistance is 2.5 milli Ohm, Phase to Phase, Sensor Type: Hall Sensors, +12 VDC Weight: 12.8 kg, Number of poles: 10, or 5 pole pairs, IP65 rated Case Maximum Current: 450 amps for 2 minutes, Continuous Current: 150 amps, Temperature Sensor in Windings is KTY84-130 Sensor, Magnet N38UH, 180C. Bearings: Front is 6206, rear is 6203, NSK, Rotor Inertia: 0.00224 kg.m^2 NEMA 143T face mount and Shaft. Shaft is 7/8 Inch Diameter. NEMA 56C Bolt Hole Pattern drilled in face too. Peak Torque is 45 Nm at 450 amps.
Inductance at 1000Hz: 19 micro Henry Phase to Phase, Maximum Rotor Speed mechanical limit is 6000 rpm, Winding Resistance is 2.5 milli Ohm, Phase to Phase, Sensor Type: Hall Sensors, +12 VDC Weight: 12.8 kg, Number of poles: 10, or 5 pole pairs, IP65 rated Case Maximum Current: 450 amps for 2 minutes, Continuous Current: 150 amps, Temperature Sensor in Windings is KTY84-130 Sensor, Magnet N38UH, 180C. Bearings: Front is 6206, rear is 6203, NSK, Rotor Inertia: 0.00224 kg.m^2 NEMA 143T face mount and Shaft. Shaft is 7/8 Inch Diameter. NEMA 56C Bolt Hole Pattern drilled in face too. Peak Torque is 45 Nm at 450 amps.
